15mm WWII "rural" theme - compatible with Flames of War AVAILABLE NOW!


Code: 15A01CB

2 (different) sections of "dragon's teeth" (German: Drachenzähne) anti-tank fortification, each 50mm wide by 100mm deep (2"x 3.9"). These are designed to be compatible with Flames of War rules: use two of them in a line to make a standard fortification section of 200x50mm, or one in front of the other to make an historically correct and accurately scaled 1/100 ("15mm" wargame scale") model.
These multiple lines of square-pyramidal reinforced concrete obstacles were designed to impede the movement of tanks and mechanised infantry, they were employed extensively in WWII, particularly on the Siegfried Line, of which our model is a faithful reproduction.
Supplied unpainted.
Click here for shipping charges

Plain cast: EURO€ 7.50
Quantity:












Code: 15A02CB

Front Line Command post + small base.
One 50mm wide by 65mm deep (2"x 21/2") + one 32mm wide by 25mm deep (11/4"x 1").
Perfect as a game objective marker this model is cast in tough polyurethane resin and in the same size of a large FoW base. It has plenty of beautifully sculpted surface detail to help you in painting, including damage from enemy fire which will add an authentic feel to your battleground! Comes complete with a small scenic base suitable for command units, snipers, observers, etc. selected at random from 10 different variations.
Supplied unpainted.

Click here for shipping charges

Plain cast: EURO€ 7.50
Quantity:








Master Model by C. Berni
Painted by C.Berni


Code: 15A03CB NEW!

Ammunition dump + small base.
One 50mm wide by 65mm deep (2"x 21/2") + one 32mm wide by 25mm deep (11/4"x 1").
Cast in tough polyurethane resin and designed specifically as a game objective marker this fantastic little model is the same size of a large Flames of War base to be fully compatible with the rules and has plenty surface detail to help you in painting. Comes complete with a small scenic base suitable for command units, snipers, observers, etc.
Supplied unpainted.

Click here for shipping charges

Plain cast: EURO€ 7.50
Quantity:







Master Model by C. Berni
Painted by C.Berni






Code: 15A05CB

4 different Medium/Light Artillery scenic bases (rural) each 32mm wide by 50mm deep (11/4"x 2").
A set of bases cast in tough polyurethane resin in the same size of a medium (deep) FoW base. These are very similar to 15A06CB but while the "HMG" bases have a hastily built repair setup along the lenght of the base, these are designed to be used with the short side as the front to allow the gun and crew to be positioned on the whole depth, and the surface details are arranged consequently. That said, nothing stops you to use them for HMGs, mortars, infantry or anything else you may want to, of course!
Supplied unpainted.

Click here for shipping charges

Plain cast: EURO€ 7.50
Quantity:










Code: 15A06CB

4 different HMG/mortar scenic bases (rural) each 50mm wide by 32mm deep (2" x 11/4").
A set of bases cast in tough polyurethane resin in the same size of a medium (wide) FoW base. These are very similar to 15A05CB but while those "gun" bases have a hastily built repair setup at the front to allow the gun and crew to be positioned facing the depth of the base, these are designed to be used with the long side as the front, and the surface details are arranged consequently. Nothing stops you to use them for anything else that fits in of course!
There are several different designs of this item, pack contains a random selection. Supplied unpainted.

Click here for shipping charges

Plain cast: EURO€ 7.50
Quantity:








Code: 15A07CB

4 different Vehicle scenic bases (rural) each 32mm wide by 50mm deep (11/4"x 2").
A set of bases cast in tough polyurethane resin and beautifully sculpted to accommodate 15mm vehicles and perfect also for bike or jeep teams. Designed to be fully compatible with Flames of War standard basing, the surface detail is up to our usual standard with plenty of depth to help you in painting.
Supplied unpainted.
Click here for shipping charges

Plain cast: EURO€ 7.50
Quantity:






Model by C. Berni
Painted samples will be available soon!




Code: 15A08CB

4 different 4 holes Infantry scenic bases (rural) each 50mm wide by 32mm deep (2" x 11/4").
A set of bases cast in tough polyurethane resin and beautifully sculpted to accommodate 15mm figures. While the same overall size as the bases from Battlefront, these are approximately 2mm thick and on top of that there is textured terrain and details added. As a consequence you can easily pick these bases up from the edges, meaning that you’ll never have to grab the figures themselves anymore! Designed to be fully compatible with Flames of War standard basing, the surface include all sorts of improvised repairs that troops will naturally look for and use for cover in a rural environment.
Supplied unpainted.
Click here for shipping charges


Plain cast: EURO€ 7.50
Quantity:






Master Model by C. Berni
Painted by C. Berni




Code: 15A09CB

6 different small scenic bases (rural) each 32mm wide by 25mm deep (11/4"x 1"). Cast in tough polyurethane resin and designed to be fully compatible with the small size for Flames of War bases, these are ideal for command, snipers, observers, weapon teams and anything else required to have only a couple of figures on a base. The surface include all sorts of improvised repairs that troops will naturally look for and use for cover and of course plenty of deep carved details to help you in painting them!
There are many different designs, each pack contains a random selection!
Supplied unpainted.
Click here for shipping charges


Plain cast: EURO€ 7.50
Quantity:






Master Model by C. Berni
Painted by C. Berni




Code: 15A10CB

3 different medium + 1 small 'dug-in' markers (rural).
Medium markers are 80mm wide by 30mm deep (31/8"x 13/16"). The space inside is large enough to accomodate a Large Base (face on) or a Medium Base (wide).
Small markers are 58mm wide by 25mm deep (25/16"x1"). The space inside is large enough to fit a Small Base or a Medium one (deep).
Cast in tough polyurethane resin and designed to fit around the standard size of Flames of War bases, these are the perfect solution to mark out your protected units. As you can see they are highly detailed with tree stumps, pieces of broken fences, sandbags and all sort of things you can expect to find piled up into hastily constructed field fortifications.
Supplied unpainted. All sizes are approximate.


Click here for shipping charges

Plain cast: EURO€ 7.50
Quantity:

status:
item production has been discontinued, it is currently being redesigned.








Code: 15A11CB


2 different large + 1 small 'dug-in' markers (rural).
Large markers are 92mm wide by 38mm deep (35/8"x 11/2"). The space inside is large enough to accomodate a Large Base (wide) or two medium ones.
Small markers are 58mm wide by 25mm deep (25/16"x1"). The space inside is large enough to fit a Small Base or a Medium one (deep).
Cast in tough polyurethane resin and designed to fit around the standard size of Flames of War bases, these are the perfect solution to mark out your protected units. As you can see they are highly detailed with tree stumps, pieces of broken fences, sandbags and all sort of things you can expect to find piled up into hastily constructed field fortifications.
There are several different designs of this item, pack contains a random selection! Supplied unpainted. All sizes are approximate.


Click here for shipping charges

Plain cast: EURO€ 7.50
Quantity:

status:
item production has been discontinued, it is only available until stock lasts.









Code: 15A12CB

Food stash + small base.
One 50mm wide by 65mm deep (2"x 21/2") + one 32mm wide by 25mm deep (11/4"x 1").
Perfect as a game objective marker this model is cast in a sigle piece tough polyurethane resin and in the same size of a large FoW base. It has everything your army needs to celebrate properly after victory, all with plenty of beautifully sculpted deeply carved details to help you in painting! Comes complete with a small scenic base suitable for command units, snipers, observers, etc. selected at random from over 10 different variations.
Supplied unpainted.


Plain cast: EURO€ 7.50
Quantity:
15mm Food stash (objective marker) + small base





15mm Food stash (objective marker) + small base
Master Model by C. Berni
Painted by C.Berni







Code: 15A13CB

2 different Heavy Artillery scenic bases (rural) each 50mm wide by 65mm deep (2"x 21/2").
Cast in tough polyurethane resin and designed for any large artillery piece, these two bases are each the same size of a large FoW base and will provide you with a very realistic gun emplacement that is perfectly compatible with Flames of War rules. Just add Big Guns!
Supplied unpainted.
Click here for shipping charges

Plain cast: EURO€ 7.50
Quantity:




Master Model by C. Berni
Painted by C. Berni








Code: 15A14CB NEW!
Fuel dump + small base.
One 50mm wide by 65mm deep (2"x 21/2") + one 32mm wide by 25mm deep (11/4"x 1").
Tank fuel consumption was measured in gallons per mile rather than miles per gallon and it was of paramount importance to have enough fuel on hand to keep your armoured vehicles going, so temporary fuel dumps like this were set up close to the front line just before the battle. Perfect as a game objective marker this model is cast in tough polyurethane resin and in the same size of a large FoW base. It has plenty of beautifully sculpted surface detail to help you in painting. Comes complete with a small scenic base suitable for command units, snipers, observers, etc. selected at random from 10 different variations.
Supplied unpainted.


Plain cast: EURO€ 7.50
Quantity:







Master Model by C. Berni
Painted by C.Berni




Code: 15A15CM
DISCONTINUED

2 different large vehicle (tank) scenic bases each 50mm wide by 65mm deep (2"x 21/2").
A set of bases cast in tough polyurethane resin and beautifully sculpted to accommodate extra large 15mm vehicles that would not fit on standard medium bases. Designed to be fully compatible with Flames of War standard basing, the surface detail is up to our usual standard with plenty of depth to help you in painting.
Supplied unpainted.
Click here for shipping charges

Out of Stock! Sorry!
status:
item has been discontinued and it is currently being redesigned.




DISCONTINUED!



Code: 15A16CM HURRY! ONLY A FEW LEFT!

3 different extra long Vehicle scenic bases each 32mm wide by 74mm deep (11/4"x 3").
A set of bases cast in tough polyurethane resin and beautifully sculpted to accommodate extra long 15mm vehicles that would not fit on standard medium bases. Designed to be fully compatible with Flames of War standard basing, the surface detail is up to our usual standard with plenty of depth to help you in painting.
There are several different designs of this item, pack contains a random selection! Supplied unpainted.
Click here for shipping charges

Plain cast: EURO€ 7.50
Quantity:

status:
item production has been discontinued, it is only available until stock lasts.





DISCONTINUED!



Code: 15A17CB

2 different large heavy mortar or rocket battery scenic bases, each 50mm wide by 65mm deep (2"x 21/2").
Cast in tough polyurethane resin and designed specifically to hold a German 88mm gun and its trailer, these two bases are each the same size of a large FoW base and will provide you with a very realistic gun emplacement that is perfectly compatible with Flames of War rules.
Supplied unpainted.
Click here for shipping charges

Plain cast: EURO€ 7.50
Quantity:










Code: 15A18CB

Bombed Merceds 170V + small base
One 50mm wide by 65mm deep (2"x 21/2") + one 32mm wide by 25mm deep (11/4"x 1").
Perfect as a game objective marker this model is cast in tough polyurethane resin and in the same size of a large FoW base. It has plenty of beautifully sculpted surface detail to help you in painting, including realistic battle damage to add an authentic feel to your battleground! Comes complete with a small scenic base suitable for command units, snipers, observers, etc. selected at random from 10 different variations.
Supplied unpainted.


Click here for shipping charges

Plain cast: EURO€ 7.50
Quantity:







Master Model by C. Berni
Painted by C.Berni




Code: 15A19CB

15mm M2 modular pontoon bridge (US)

The M2 Treadway Bridge was a heavy pontoon bridge that had up to a 40-ton capacity. It could be deployed in almost any length and it was used over major rivers like the Rhine and Moselle. The bridge was assembled from several purpose-built components including the U.S. M2 pneumatic pontoon, M2 treadway bridge sections and access ramps. It would take five and a half hours to an experienced crew to place a 362 foot section of M2 bridge in daylight and two hours more at night. Two pontoons fastened together could (and were!) used as farries. This model is a very accurate scale reproduction and has plenty of beautifully sculpted surface detail to help you in painting!
Like all other models in this range it is made of tough POLYURETHANE; it require no assembly but can be obviously glued in place if you like. Overall bridge size is approximately 180x95mm and the height is 18mm. You can confortably fit a standard infantry Flames of War base on a single pontoon.
Supplied unpainted.

Click here for shipping charges
Plain cast: EURO€ 14.90
Quantity:








Master Model by C. Berni
Painted by C.Berni




Code: 15A20CB

15mm M2 single pontoon module (US)

This individual pontoon is mainly designed as an expansion for our M2 Treadway Bridge. Two pontoons fastened together could (and were!) used as ferries. This model is a very accurate scale reproduction and has plenty of beautifully sculpted surface detail to help you in painting! Like all other models in this range it is made of tough POLYURETHANE; it require no assembly but can be obviously glued in place if you like. Overall pontoon size is approximately 41x95mm and the height is 18mm. You can confortably fit a standard infantry Flames of War base on a single pontoon.
Supplied unpainted.

Click here for shipping charges

Plain cast: EURO€ 7.50
Quantity:






Master Model by C. Berni
Painted by C.Berni




Code: 15BRA

A modular barge bridge set that can be used from medieval time up to WWII! Being made of modular components means you can tailor the length to your needs, and combine it with other elements of our ranges. This model is specifically designed as a military wooden bridge for 15mm games, and it is therefore the exact width to comfortably hold a 40mm wide figures base, it also works perfectly well with smaller scales as a larger construction. The complete base model include three barges and the overall size is180x80mm, 32mm tall. The walkway is 45mm wide and at the top of the ramp is 15mm high. It can be used with less barge modules to have a shorter size if needed, or you can purchase additional modules to extend it!
5 parts. Supplied unpainted.





15BRA complete modular barge bridge: EURO€ 19.50
15BRA
Quantity:



 15mm modular rural barge bridge!

15BRB single barge module: EURO€ 7.50


15BRB
Quantity:



Code: 15A21CB
Battlefield Accessories: stacked supplies
This is something different: a pack chocked full of beautifully detailed accessories you can use to customize and add interest to your units and terrain!
Cast in tough polyurethane resin and designed for 15mm figures, these are the perfect solution to make your own objective markers, truck loads, hastily built barricades, and a hundred other different uses! The pack contains nine different clumps of stacked goods piled on wooden boards, including roll-ups, wooden boxes, jerrycans and drums, picked at random out of the ten design shown. They are just waiting to go on your bases!
Pack contents can vary. Supplied unpainted. All sizes are approximate.


Click here for shipping charges

Plain cast: EURO€ 7.50
Quantity:







For more variety and for stowage you can also use
Code LGS3 and >Code LGS4 WWII supplies!



Code: 15017CM HURRY! ONLY A FEW LEFT!

1 small fortified emplacement (rural)

This very detailed reproduction is perfect as a hull-down marker, for a small weapon emplacement or as a game objective. The space inside is large enough to accomodate a standard Flames of War small base. It is designed to work together with all our other models to let you recreate large fortified positions.
Like all other models in this range it is made of tough POLYURETHANE. Overall size is 68x59mm and the height is 18mm.
Supplied unpainted.

Click here for shipping charges

Plain cast: EURO€ 7.50
Quantity:

status:
item production has been discontinued, it is only available until stock lasts.






DISCONTINUED!



Code: 15018CM HURRY! ONLY A FEW LEFT!
1 medium fortified emplacement (rural)

This very detailed reproduction is perfect for a medium weapon emplacement or as a game objective. The space inside is large enough to accomodate a standard Flames of War medium base (wide). It is designed to work together with all our other models to let you recreate large fortified positions.
Like all other models in this range it is made of tough POLYURETHANE. Overall size is 58x84mm and the height is 19mm.
Supplied unpainted.


Click here for shipping charges

Plain cast: EURO€ 7.50
Quantity:
status:
item production has been discontinued, it is only available until stock lasts.









DISCONTINUED!


Code: 15078CM HURRY! ONLY A FEW LEFT!

2 Large fortified emplacement (rural)

These very detailed reproduction are perfect for the largest weapon emplacement and are specifically designed so that each can contain large guns like German 88mm or their train in any configuration. The space inside is large enough to accomodate one Flames of War large base each.
Like all other models in this range these are made of tough POLYURETHANE. Overall size is 103x75mm and the height is 21mm.
Supplied unpainted.
Click here for shipping charges

Plain cast: EURO€ 14.90
Quantity:

status:
item production has been discontinued, it is only available until stock lasts.








DISCONTINUED!